Displaying items by tag: slag cement

India: JSW Cement has launched its ‘Comp Cem’ product in Goa. It is a blend of clinker, ground granulated blast furnace slag and fly ash, according to the United News Of India. The new product is intended to help the cement producer expand its distribution network in the southern and western parts of the country.

India: JSW Cement plans to increase the production capacity to 3.6Mt/yr at its Salboni grinding plant in West Bengal. The unit has a capacity of 2.4Mt/yr at present, according to the Economic Times newspaper. The cement producer plans to strengthen its presence in eastern India starting with West Bengal, Bihar, Odisha and Jharkhand. The plant manufactures Portland Slag Cement and it hopes to tap into local demand for this product with the upgrade.

US: Charah has opened a slag grinding plant at the Port of Coeymans near Albany, New York. The unit uses the company’s proprietary process to grind granulated blast furnace slag (GBFS) to create supplementary cementitious materials (SCMs). The site is accessible by ship, truck and rail and will sell materials to concrete producers in the northeast of the country.

The new plant will also produce slag cement that is marketed under the MultiCem brand. Slag cement will be distributed throughout Charah Solutions’ MultiSource materials network, a nationwide distribution system of more than 30 sourcing locations that provide ready mix concrete (RMX) producers and other customers SCMs, including fly ash and slag cement.

Bangladesh: Shah Cement has inaugurated the world’s largest vertical roller mill (VRM), supplied by Denmark’s FLSmidth, at its Muktarpur plant in Munshiganj. The mill is designed to produce Ordinary Portland Cement (OPC), Pozzolana Portland Cement (PPC), Portland Slag Cement (PSC) and slag cement types. It is producing PPC at a capacity of 500t/hr at 3500 Blaine with 15% slag.

The FLSmidth OK 81-6 Mill has an 8.1m grinding table and six grinding rollers powered by two 5.8MW FLSmidth MAAG Max Drive gear systems. FLSmidth says that the mill is the largest VRM ever to be installed in a cement plant in terms of dimension, operating capacity and installed power. In addition to the OK Mill, FLSmidth supplied the process and layout engineering, along with site advisory. The supporting equipment included FLSmidth Pfister weigh feeders, FLSmidth Airtech process bag filters, process fans and auxiliary equipment from raw material hopper discharge to process bag filter discharge. It was put in operation in September 2018

Shah Cement Industries is the largest cement producing plant in Bangladesh, with a capacity of 8.0Mt/yr. The company is part of the Abul Khair Group, the largest business conglomerate in Bangladesh. It produces three main cement products including CEM II – Portland Composite Cement and CEM –III Blast Furnace Cement. Both products use slag.

UK: HeidelbergCement’s subsidiary Hanson is supplying its Regen GGBS (ground granulated blastfurnace slag) cement replacement for a project to build a new tidal barrier across the New Cut River in Ipswich. The Euro24m project is being managed by the Environment Agency to protect properties at risk of flooding.

The work is being carried out by VBA, a joint venture between VolkerStevin, Boskalis Westminster and Atkins, and is due to be fully operational by September 2018.

Australia: The New South Wales Environment Protection Authority (EPA) has fined Port Kembla Milling’s cement and slag grinding plant US$23,000 for allegedly storing raw materials in the open, in breach of its licence conditions. Raw materials, including gypsum and limestone, were allegedly stored in the open at the subsidiary of Cement Australia on at least five occasions since January 2016 in breach of the site’s planning approval and licence conditions. Such materials should be stored in an enclosed location to prevent dust emissions.

“The requirement to store materials in an enclosed building is a key way to ensure dust emissions from bulk materials are prevented. A measure that is very important given the residential areas near Port Kembla port,” said EPA Regional Director Metropolitan Giselle Howard.

In addition to the fines, the EPA has also required Port Kembla Milling to complete an independent raw materials handling audit to confirm appropriate storage and management systems are put in place. The company has made some initial steps to respond to this request, and the EPA will continue to work with the licensee to ensure full compliance.

India: Mamata Banerjee, the chief minister of West Bengal, has inaugurated JSW Cement’s plant at Salboni. The US$125m grinding plant has a production capacity of 2.4Mt/yr, according to the Press Trust of India. It started commercial production at the site in July 2017 with plans to manufacture Portland Slag Cement. The cement producer is already preparing upgrades at the unit including a US$15.6m captive power plant with a capacity of 18MW and a US$47m production capacity increase of 1.2Mt/yr.

India: KIC Metaliks plans to build a 300t/day slag cement grinding plant at its pig iron plant at Raturia in the Bardhaman district of West Bengal. The project is part of a wider upgrade at the site to turn it into a steel plant, according to Projects Today. Other upgrades a direct reduced iron kilns, a sinter plant, a rolling mill, a pulverised coal injection plant and a captive power plant. The upgrade plans are valued at around US$93m. The company is awaiting environmental clearance for the project.

Indonesia: Semen Indonesia has launched a new slag cement product under the brand ‘Maxstrength Cement.’ The cement producer said it was the first Portland Slag cement produced in the country. The company can producer 1500t/day of the slag cement and it is intended for use in large scale infrastructure projects that require high flexural strength, such as bridges or road flyovers.

India: The Cement Corporation of India (CCI) has signed a memorandum of understanding with Rashtriya Ispat Nigam Limited (RINL), the owner of the Visakhapatnam Steel Plant to build a 2Mt/yr slag and fly ash cement plant. RINL will provide the blast furnace slag and fly ash for the project. The plant is expected to cost US$23m and it will take 15 months once the deal is finalised.