Displaying items by tag: emissions

Canada: CarbiCrete has obtained the first Environmental Product Declaration (EPD) for its cement-free concrete masonry units (CMUs). The products have specific CO₂ emissions of 11.7kg/m³ for the CMUs, 94% below the industry norm of 200kg/m³. FinancialWire News has reported that CarbiCrete’s recipe for the CMUs replaces cement with steel by-products, while also sequestering CO₂.

Concrete products company Canal Block is set to commence production of CarbiCrete CMUs at its Port Colborne plant in Ontario in early 2025.

India: The Samruddhi Expressway stretches 701km from Nagpur to Mumbai. This project by the Maharashtra State Road Development Corporation (MSRDC) has been focused on reducing environmental impact by the use of fly ash and blast furnace slag in its concrete.

Anil Gaikwad, managing director of the MSRDC, said "Fly ash and ground granulated blast furnace slag were also used in the concrete,” He continued “Fly ash has been used to the extent of 20% in the concrete."

The project emphasised circularity by reusing and recycling materials. Responsible sourcing of materials was a key component, ensuring vendors complied with environmental standards. Innovative water management strategies were also implemented, including the creation of farm ponds through agreements with local farmers.

EU/UK: EUROSLAG says that the use of ground granulated blast furnace slag (GGBFS) in cement production in the EU and UK between 2000 and 2022 has generated a cumulative reduction in CO₂ emissions of 408Mt. GGBFS replaced 716Mt-worth of raw materials over the period.

EUROSLAG Chair Thomas Reiche said "Resource conservation through secondary raw materials, especially in the construction sector, and lower emissions of climate-damaging CO₂, are of outstanding ecological and economic importance. The use of ferrous slags makes an important contribution to this. EUROSLAG is working multilaterally to master the enormous challenges in the coming years, above all the transformation of the steel industry, through research and adjustments to national and European regulations.”

New Zealand: Holcim New Zealand says that it has received a mill for use in its upcoming Auckland cement replacement products import and distribution facility. The company opted for a Christian Pfeiffer ball mill for the project.

Holcim New Zealand says that alternative materials imported via the Auckland facility will eliminate 100,000t/yr of cement from New Zealand's 1.6Mt/yr consumption. The company expects that this will cut 78,000t/yr of CO₂ emissions.

Australia: Hallett Group plans to establish a slag cement grinding plant in Port Augusta, South Australia. Magnet News has reported the cost of the project as US$83.9m, towards which the producer has received US$13.4m in government funding. The plant will produce cement using South Australian ground granulated blast furnace slag (GGBFS) from Nyrstar’s Port Pirie and Liberty Primary Steel’s Whyalla steel refineries and fly ash from the site of the former Port Augusta power plant. Its operations will be 100% renewably powered. An accompanying new distribution facility at Port Adelaide will ship the cement to markets. The project will create 50 new jobs.

When the Port Augusta grinding plant becomes operational in 2023, its products will reduce regional CO₂ emissions by 300,000t/yr, subsequently rising to 1Mt/yr, according to the company’s expansion plans.

Hallett Group chief executive officer Kane Salisbury said "We're talking about 1% of the entire country's 2030 [CO₂ reduction] commitment, delivered through this project." Salisbury added "We're looking at turning South Australia into a global leader in manufacturing green cement."