Displaying items by tag: France

Luxembourg: ArcelorMittal plans to reduce its European steel production levels due to weak market demand and high import levels. It will reduce primary steelmaking production at its facilities in Dunkirk, France and Eisenhüttenstadt, Germany. Reduce primary steelmaking production at its facility in Bremen, Germany in the fourth quarter of 2019, where a planned blast furnace stoppage for repair works will be extended. It will extend the stoppage planned in the fourth quarter of 2019 to repair a blast furnace at its plant in Asturias, Spain.

“This is again a hard decision for us to have taken but given the level of weakness in the market, we feel it is the prudent course of action. This will be a temporary measure that will be reversed when market conditions improve. In the meantime, our employees remain our utmost priority and we are doing everything we can to ensure that the right social measures are in place to support them and their families during this difficult time,” said Geert van Poelvoorde, the chief executive officer (CEO) of ArcelorMittal Europe – Flat Products.

In early May 2019 ArcelorMittal announced its intention to temporarily idle production at its steelmaking facilities in Kraków, Poland and reduce production in Asturias, Spain. The announcement also impacted the planned increase of shipments at ArcelorMittal Italia to a 6Mt/yr run-rate. The planned increase will be slowed down following a decision to optimise cost and quality over volume in the current market environment.

France: Eiffage, via its Eiffage Route subsidiary, and Phoenix Services have secured a new contract with ArcelorMittal, through SGA, their joint subsidiary for the removal and processing of by-products from the Dunkirk steelworks, the recovery of metal parts and the recycling of slag. This contract, worth an estimated Euro155m over 10 years, will come into effect on 1 December 2018.

The services to be provided entail collecting approximately 1Mt/yr of liquid slag, removing its iron content by a process already agreed in an earlier contract signed in 2004 and recycling it for embankments, agricultural uses and the manufacture of hydraulic binder marketed by Eiffage under the Sidmix brand. At least 75 personnel will be mobilised on a 24 hour per day basis to guarantee the removal of the slag from the steelmaking facility.

France: Ecocem France has inaugurated its 0.75Mt/yr slag cement grinding plant in Dunkirk. The unit, located near ArcelorMittal’s Dunkirk steel plant, started commercial production in May 2018. The site has plans to expand production to 1.4Mt/yr at a later date. It has created 26 jobs.

The plant is located in the Port of Dunkirk. It includes a vertical mill, a mixer and silos. The site is intended to target markets in northern France, the UK and Northern Europe. Plans to export 0.25Mt/yr of ground slag to the UK via terminals in London and Liverpool and 50,000t to Sweden have already started.

Ecocem France is a joint venture between Ireland’s Ecocem and ArcelorMittal. Ecocem invested Euro37m in the project in Dunkirk. It follows Ecocem France’s opening of its 0.7Mt/yr grinding plant at Fos-sur-Mer, also near to an ArcelorMittal plant

France: ArcelorMittal plans to increase its stake in Ecocem France to 49% from 30% by the end of May 2018. The transaction is subject to the approval of the Irish Competition Authority. The French subsidiary of Ireland’s Ecocem was set up in 2007 by ArcelorMittal and Ecocem Materials.

Ecocem produces slag cement from ground granulated blast furnace slag. Ecocem France operates a 0.7Mt/yr grinding plant at Fos-sur-Mer near to an ArcelorMittal plant. It plans to open a second 0.7Mt/yr grinding plant at Dunkirk in May 2018. The new plant is intended to target western and northern France as well as export markets in the UK and Belgium.

Ireland: Eocem Ireland has introduced new corporate branding following growth in the Ecocem Group across Europe. The rebrand has been timed to tie in with group integration and new product launches. The ground granulated blast furnace slag (GGBS) producer has adopted a new logo with a company tagline – ‘Innovation Powering Sustainability’ – to accentuate the group’s innovation and environmental sustainability. Ecocem says that the rebrand of Ecocem Ireland, which is tied in with a rebrand across the group, is an indication of the revised focus of the group over the coming years.

“It is an exciting time for the Ecocem Group as there are many areas that we are working on with our innovation teams that will bring targeted solutions to customers across Ireland and the UK enabling them to benefit from using increased percentages of GGBS within their market offerings,” said Micheál McKittrick, the Managing Director for Ecocem Ireland.

Ecocem says it is Europe’s largest independent specialist producer of GGBS cement with a capacity of 2.4Mt/yr. Developments in the organisation have seen a growing interaction across its operating regions in Ireland, Holland, France, UK and Sweden, as well as the emergence of new products. Ecocem Ireland is a wholly-owned subsidiary of Ecocem Materials and it operates a slag grinding plant in Dublin Port.

France: ArcelorMittal has discussed the role of slag in the circular economy at a recent media event in Paris. Alan Knight, head of corporate responsibility, described how steel plays a key role in the circular economy, at a time when the European Union is debating its Circular Economy Package, which includes revised legislative proposals on waste. He detailed a number of projects at ArcelorMittal that are using waste created during the steelmaking process including turning steelmaking slag into agricultural fertiliser as well as making bioethanol to fuel aeroplanes from waste gases created during the steelmaking process.

“At ArcelorMittal we are active in being involved in a number of different partnerships that look to more fully utilise and exploit the potential from re-using by-products and waste gases. We are fully supportive of the concept of carbon capture and utilisation and convinced that this offers an important long-term opportunity for the reduction of CO₂,” said Knight.

Key topics discussed at the event included the effects of Chinese steelmaking overcapacity upon the European industry. David Clarke, ArcelorMittal’s head of strategy and chief technology officer, said that imports of steel are effectively ‘swallowing’ up a slow increase in European steel consumption since the market crash in 2009. However, Europe Flat Products chief executive officer Geert Van Poelvoorde added that the European steel industry could prosper under the right legislative framework.

France: Ecocem France has ordered a Loesche type LM 46.2+2 CS mill for a slag cement grinding plant that it is building in Dunkirk. It follows a previous order by Ecocem of a LM 46.2+2 CS mill for the dry grinding of ground granulated blast furnace slag (GGBFS) at its plant at Fos-sur-Mer.

The LM 46.2+2 CS for the plant in Dunkirk is designed for the grinding of cement clinker and granulated blast furnace slag at a capacity of 105t/hr GGBFS. The gearbox will have a capacity of 3150kW.

All the mechanical equipment for the grinding plant starting from mill feed to the product discharge into the product silos is included in the Loesche scope of supply. The Loma heater type LF 28-L will be a full-inlined type designed to burn natural gas as well as blast furnace gas. The burner supplied by Loesche will be the MSBZ type, complete with fitting rack and local switch cabinet.

The lead-time for the main components of the mill and for the additional units included in the scope of supply is 6 to 13 months. The commissioning of the vertical roller mill is planned for the middle of 2017.

Ecocem’s grinding plant will be installed close to Arcelor steelworks for use of their granulated blast furnace slag. This LM 46.2+2 CS will be the seventh Loesche vertical roller mill installation for slag and cement grinding in France.

France: The slag heaps or 'terrils' of northern France, including the Loos-en-Gohelle terrils that are now recognised as a world heritage site by Unesco, are being transformed for alternative uses like nature trails or heritage sites. At Noeux-les-Mines, there is an artificial ski-slope, according to the BBC.

At the village of Rieulay, the Chevrerie des Terrils, Julien Graf grazes his flock of 40 animals in the biodiverse terril brush. "This is what they call a 'pioneer' environment; an ecosystem in which vegetation is just beginning to re-appear. It's very rare. The goats prevent the terril from being completely taken over by trees and brush. That has happened in a lot of other terrils, where you can no longer see the black soil," said Graf. "Being black, the soil retains the warmth which encourages growth. The vegetation is tough and fibrous and that is perfect for goats. Goats don't like grazing on grass. They prefer shrubs and bushes like we have here."

A few miles to the west, France's most northerly vineyard was established in 2011 on a slag heap. In 2013, it produced 150 bottles and in 2014 it produced 300. Wine-grower Henri Jammet explained that much depends on the age of the slag: "The earlier the terril, the more is likely to grow on it. In the 18th and 19th centuries, they sorted by hand, so a lot of what got chucked aside still contained elements of coal and other minerals. Often the slag continued to combust quietly over the years, which ultimately created a soil which, while not exactly rich, contains fertile elements," said Jammet. "Obviously the soil is poor, but that is good. Vines need to struggle in order to bring out the best in the grape. Our wine is sharp because they don't have the sun up here to reduce the acidity and it's got the proper Chardonnay citrus notes."

France: Holcim will sell its slag grinding plant in Dunkirk as part of divestments required by the European Commission (EC) to approve its merger with Lafarge.

The European Union's antitrust authority has required asset sales by both companies in regions where their activities overlap. The EC's approval is conditional upon the divestment of Lafarge's businesses in Germany, Romania and the UK. Holcim is required to divest its operations in France, Hungary, Slovakia, Spain and the Czech Republic. The proposed transaction concerns assets worth several billion Euros and will create the world's largest cement producer, with operations in 90 countries.

"The Commission had concerns that the transaction, as originally notified, would have had a detrimental effect on competition in a significant number of markets in the European Economic Area (EEA)," said the EC. "The commitments offered by the two companies address these concerns."

According to the EC, its assessment found that the merged entity would have faced insufficient competitive pressure from the remaining players in many markets. This would have brought a risk of price rises. In order to prevent a negative impact on competition, the companies have committed to divesting most of the operations where their activities overlap. Further, the EC said that Holcim and Lafarge will not be allowed to close the deal until it has approved the buyers of the assets put up for sale.